Brake Booster Pushrod Gauge
Vivek created these files to allow folks to print the recommended brake booster pushrod gauge, as seen in Ford's factory shop manual illustration to the right. (Click on the illustration to see it larger.)
Note that the illustration calls for the part to be 2 15/16" wide. Vivek has found that it fits nicely between the studs on his '86 F250. But it was a bit too wide on his '78 Bronco. We need to do a bit of research to see what the difference is in stud location on various trucks.
Note that the illustration calls for the part to be 2 15/16" wide. Vivek has found that it fits nicely between the studs on his '86 F250. But it was a bit too wide on his '78 Bronco. We need to do a bit of research to see what the difference is in stud location on various trucks.
|
| ||||